K-series

View as:
  • 1300HP+ K-Series Dual Backdoor

    $925.00

    This is the new KLM Dual Backdoor intercooler specifically designed to work best with a center feed intake manifold K-series

    Dimensions 32x12x6

    • End tanks professionally tig welded inside and out
    • M12x1.75 threaded mounting bungs
    • High quality aluminum
    • Proven Performance!
    • Billet Velocity inlet and outlet spigots
    Select options
    Compare
  • ClutchMasters – FX400 Clutch Kit – 6 Puck (K-Series)

    $485.00

    Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool ​

    Add to cart
    Compare
  • HONDA Civic EG/EK with EKK2 mounts (non-ABS hub) K-Series 600HP Level 3.9 Axle/Hub Kit

    $1,299.99

    Civic EG/EK (with EKK2 mounts) non-ABS hub K-Series 600HP Level 3.9 Axle/Hub kit. This axle/hub system is designed for the real fast street or drag cars with up to 600HP. This was our older (pre-2004) Level 5 system and we have brought it out of retirement due to the fact that a 600HP street car is now a normal thing. This has been one of the best systems for a Honda platform to date and is still a staple in most tuner shops around the world. The kit comes with both axles made from high grade aircraft quality material with billet inner CV housings and the outer CV is 20% larger than a factory one and is made from a proprietary material that is brutally strong. The kit comes with a custom hub that is an exact replica of the factory one it just has the larger spline inside and includes extended ARP racing studs (standard length studs available upon request). Rated to 600HP with a full 1-year warranty.

    Add to cart
    Compare
  • HONDA EG/DC/EK with EKK2 mounts K-Series Pro-Level Axle/Hub/28 spline Intermediate Bar Kit

    $2,499.99

    The Pro-Level Honda/Acura systems are made to withstand the demands of the highest horsepower drag cars and can currently be found in the fastest FWD Honda’s to date. Our Honda/Acura Pro-Level kit is a full drivetrain system that includes both axles, featuring our Porsche-style 108mm inner CV joints and bolt-on axle flanges, our signature 33 spline outer CV’s and the larger hubs to accommodate them. The most significant part of the Pro-Level System is that we are replacing the standard 27 spline differential spline with our 40% larger 28 spline transmission spline plug and intermediate bar, for use with the DSS 28 spline Pro Limited-Slip Differential (DSS Pro-LSD sold separately). This system includes all the hardware necessary for the install and comes with our full 1-year warranty. And if you already have a set of our Level 5.9 axles, they can now be upgraded to Pro-Level axles for much less than purchasing a new set. When you’re ready to go for records and challenge the biggest names in FWD drag racing, the DriveShaft Shop Pro-Level drivetrain is the only way to go.
    This is drag race-only application made to withstand over 1000WHP.

    Add to cart
    Compare
  • K Series Final Drive (Drag) 4.7

    $1,695.00

    This product is available in a selection of ratio’s each with varying power ratings. Used in conjunction with our “World Famous”
    K-Series 1st-4th Drag Gear Set.
    Note :- Custom ratios attract an addition surcharge and production period.
    Ratio Options :-
    4.769 Option:-HO-K5SPD-FD4.7-GA

     

    Add to cart
    Compare
  • K SERIES SAVAGE SIDEWINDER

    $1,399.00

    ALL NEW SAVAGE MANIFOLD SERIES

    ​  When you take an already proven manifold to the next level “SAVAGE”

    • Stepped runner design using 1.5 to 2 inch diameter
    • Sch40 stainless steel runners
    • Fully back purged welding process
    • Ported head and turbo flange ​
    • Proven HP capabilities
    Select options
    Compare
  • K-Series 1-4th Drag 5th Case Brace

    $699.00

    Used in our 1st-4th Drag Gear Set  for the Honda K-Series to replace the 5th gear to add extra strength to the input  and output shafts in heavy duty applications .

    Add to cart
    Compare
  • K-Series Filler

    $245.00

    Our NEW K-Series filler for -16AN conversion.

    -Fits K20A/A2/A3/Z1 cylinder heads

    Add to cart
    Compare
  • K-Series Lean Manifold

    $1,045.00$1,065.00

    This KLM manifold is designed to run with k series lean motor mounts.

    – Sch40 304 stainless
    – Professionally tig welded and back purged
    – Ported turbo and head flanges
    – Proven HP capabilities
    – T4 turbo flange

    Select options
    Compare
  • K-Series Lean V2 Manifold

    $1,200.00

    This is the all new Version 2 KLM Lean manifold that is designed to run with K-Series lean motor mounts.

    – Sch40 304 stainless
    – Professionally tig welded and back purged
    – Ported turbo and head flanges
    – Proven HP capabilities
    – T4 turbo flange
    – Turbosmart or Tial 60mm wastegate flange

    Select options
    Compare
  • K-Series Sidewinder

    $1,025.00$1,055.00

    KLM FAB K-series sidewinder!

    Select options
    Compare
  • PPG K Series 1-4th SC Dog Set

    $4,600.00
    ,600.00

    Designed to service top level Sport Compact racers in the USA, this set has swiftly proven its reliability and performance amongst elite level racers such as Norris Prayoonto in the USA. Now an integral part of many teams’ drivetrain the world over, this set has been a blessing for many that have persevered with unreliable competitor gearboxes over the past few years. Comes with optional aircraft aluminium centre brace attachment for added gear casing rigidity and strength. Crownwheel and Pinion is available as an option and customiseable by order.

     

    Add to cart
    Compare

Showing all 12 results