Fuel Delivery

View as:
  • 2150cc FIC Honda/Acura BlueMax Fuel Injector Clinic Injector Set (High-Z) B/D/H Series Includes Free Plug & Play Clips

    $815.00

    Honda/Acura BlueMAX Fuel Injector Clinic Injector Set: 4 x 2150cc Saturated / High Impedance Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology . Great injector for E85 or other high volume fuels! These injectors do not require a resistor pack or P&H drivers. Includes pigtails PGT DEN4 or add Plug & Play adaptors PADPDtoJ4. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS

    This massive injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
    Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

    Select options
    Compare
  • AEM E85 Fuel Pump 320lph

    $122.00

    AEM’s E85 Fuel Pump features robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and has been tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.

    The AEM E85 Fuel Pump features a compact 39mm diameter that fits most applications. It features an offset inlet design that eases installation and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every AEM E85 Fuel Pump is tested to flow 320 lph at 43 PSI before it is packaged for sale.

    Add to cart
    Compare
  • Fuel Injector Clinic 1000cc Injectors

    $411.60

    Honda/Acura Fuel Injector Clinic Injector Set: 4x1000cc Saturated / High Impedance Ball & Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology .Great for E85 applications! Includes pigtails PGT USC4.

    This injector set is precisely matched using Fuel Injector Clinic’s proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheetproviding the most complete flow matching and latency value information available in the industry today.

    Select options
    Compare
  • Fuel Injector Clinic 1100cc Injectors

    $509.60

    Honda/Acura Fuel Injector Clinic Injector Set: 4x1100cc Saturated / High Impedance Ball & Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology

    Fuel Injector Clinic’s 1100cc/min high impedance injector is the largest injector that has excellent idle performance in street driven cars while still providing enough fuel to support mid to high horsepower output. The Fuel Injector Clinic 1100cc injector is 20% larger than our 900cc (Fuel Injector Clinic 900cc is the same as ‘1000cc’ sold by others).

    Select options
    Compare
  • Injector Dynamics 1050cc Injectors

    $520.00$780.00

    The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x.

    Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner.

    Select options
    Compare
  • Injector Dynamics 1300cc Injectors

    $900.00$9,000.00

    The ID1300x is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300x was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.
    While the ID1300x was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300x has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300x allows fitment in 200+ applications, making it the most versatile injector in our lineup.

    Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
    Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
    Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
    Electrical Connector – USCAR

    If you do not see your vehicle listed below please give us a call or send an email and we will be happy to help you get the correct parts for your vehicle.

    Select options
    Compare
  • Injector Dynamics 1700cc Injector

    $1,000.00$1,500.00

    The ID1700x is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700x was designed to fill the gap between the ID1300x and the ID2000, and like the ID1300x, it features corrosion resistant internals making it compatible with all known automotive fuels.
    A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700x excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

    Select options
    Compare
  • Injector Dynamics 2000cc Injectors

    $960.00$1,440.00

    The ID2000 has set the standard for linearity and control in a large injector. Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a smooth stoichiometric idle on E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm.

    Select options
    Compare
  • Walbro 450lph In-Tank Fuel Pump (E85 Compatible)

    • Outperforms most in-tank fuel pumps, including the walbro 400
    • High pressure, high-flow performance found with the unique “fat-bottom” pump mechanism, flows 416 LPH at 12V, 450 LPH at 13.5V
    • Award-winning OE technology for consistent performance and reliability
    • OEM technology designed and developed for E85. All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications.
    Read more
    Compare
  • Weldon Racing – 2035-A Fuel Pump

    $833.99
    • Precise, consistent fuel delivery
    • Self priming
    • Pump element is 100% tool steel
    • Body machined from billet aluminum
    • All billet body pumps are 100% serviceable
    • Breakaway coupling prevents pump / motor damage in the event of contamination
    • For carbureted or injected engines
    • -12 inlet and -10 outlet o-ring ports
    Add to cart
    Compare
  • Weldon Racing – 2345-A Flow Fuel Pump

    $1,246.00
    • Precise, consistent fuel delivery
    • Self priming
    • Pump element is 100% tool steel
    • Body machined from billet aluminum
    • All billet body pumps are 100% serviceable
    • Breakaway coupling prevents pump / motor damage in the event of contamination
    • For carbureted and injected engines
    • -12 inlet and -10 outlet o-ring ports
    • 6 lbs
    Add to cart
    Compare
  • Weldon Racing – Bypass Fuel Pressure Regulator

    $250.00
    • All Weldon Regulators maintain steady fuel delivery during dramatic changes in fuel demand, such as WOT conditions, boost application and gear changes with precision pressure control
    • .281″ bypass orifice
    • Fluorosilicone diaphragm
    • Flows over 6 GPM
    • 1/8″ NPT Gauge Port
    • 1/8″ NPT manifold pressure reference port
    • Fuel pressure increases on a 1:1 ratio with boost
    • Two -10 pressure ports / -8 return port
    • Billet Aircraft Aluminum with MIL-SPEC anodizing
    • For use with all Weldon pumps as well as pumps from other manufacturers
    Add to cart
    Compare

Showing 1–12 of 13 results