View as:
  • Sale!

    SFWD Front Runner Package

    $3,050.00$3,615.00

    Including

    -Forward facing manifold t4 60mm wastegate flange
    -1300+hp intercooler 3 inlet 3,5 outlet
    ​-Hot parts kit (4 inch uppipe,2.5 wastegate dump)
    ​-3.5 intercooler piping (with or without bov flange)
    ​-Drag radiator with fan

    Select options
    Compare
  • SpeedFactory Extreme Duty L19 Head Stud Kit for Honda/Acura B & K Series

    $359.99

    SpeedFactory Racing Extreme Duty L19 Head Stud Kit for Honda/Acura B & K Series (B18C1, B18C5, B20VTEC, LSVTEC, K20, K24)

    This Kit was designed for hardcore drag racers running high boost levels that need more clamping force and tensile strength than the typical 8740 chromoly studs on the market. If you are looking for the best option, you’ve found it as these are 25% stronger than any other available off the shelf Head Stud Kit for your Honda/Acura!

    These studs are manufactured specifically for us by ARP and utilize an L19 material that is much stronger than the typical 8740 chromoly and yields a tensile strength of 240-260,000 psi. They are also provisioned with a hex broach on the top of the stud for ease of installation and enabling you to install them with the cylinder head on the car if necessary.

    Select options
    Compare
  • SpeedFactory Honda / Acura Titanium Exhaust Manifold Stud Kits

    $82.99$124.99

    SpeedFactory Honda/ Acura Exhaust Manifold Titanium Stud Kits

    SpeedFactory titanium stud kits are made of high quality Ti 6Al-4V and incorporate a hex key tip that allows them to be easily installed using an Allen wrench. Titanium 12-point nuts and washers are included.

    Use of factory exhaust manifold bolts and studs, especially with an aftermarket header/turbo system, can result in stripped or broken bolts and inadequate clamping force, resulting in leaks. This stud kit looks great and will allow you to properly clamp the exhaust manifold to the cylinder head without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust and corrosion.

    Select options
    Compare
  • SpeedFactory Modified Shift Change Holder Assembly for B-Series (New Unit)

    $612.00

    1st off, what is the SCHA, and what does it do? The SCHA is located inside the transmission housing, and is the internal mechanism that actually moves the shift forks into position, engaging each gear as it is selected.

    Why do you need this? Because you can’t finish a race with a broken gearset or the inability to get it into gear due to a damaged SCHA. Because yours is wearing out and bending, and you want to get to it BEFORE it breaks and you ruin a transmission and gear set, especially if you’re running a dogbox and big power. This also works great with stock transmissions and will help improve shifting, especially the 2-3 shift. Just push the shifter forward, and it will automatically drop into 3rd gear! It pulls the shifter to the center position with authority, to help eliminate the dreaded 1-2-1 or 2-3-2 mis-shift!

    Add to cart
    Compare
  • SpeedFactory No-Notch H-Beam Long Rod and Vitara Piston Combo

    $459.99

    This is a combo package for SpeedFactory Racing No-Notch connecting rods and Vitara pistons for the D16 engines.  This combo will bring the compression of the Vitara combo up to 8.8:1 as opposed to the standard length rod which yields 7.8:1 compression.

    Proudly introducing the new SpeedFactory Racing D16 Vitara Spec No-Notch Long Connecting Rods!

    Vitara piston turbo D16 builds are one of the most popular 300-500hp street Honda setups out there. Very cost effective, fun, and relatively simple to build. One thing that has always been frustrating with these builds is having to use standard length off-the shelf rods that are low compression, unnecessarily large and heavy, and require the usual block and girdle notching to use. Custom longer rods were then introduced that fixed the deck height/low compression issue, but you still had to deal with the tedious and time consuming task of block and girdle notching. Time to kiss those days goodbye!

    Select options
    Compare
  • SpeedFactory Spec Outlaw B Series Arias Pistons

    $695.00

    Over the years we have been fortunate to work with Arias Pistons on designing the ultimate B Series turbo piston.  With huge HP in mind, we have changed the design of the off the shelf version to accommodate 40+ psi for extreme drag race engines.  Our design features changes to the ring pack position on the piston, thicker ring pack design, strutted skirts, & added material in the proper places that we found to be an issue on engines producing more than 1000hp at the wheels.  The compression ratio depending on your cylinder head, gasket, rod, and stroke will range from 10.5:1-11:1 roughly with this flat top design.

    Select options
    Compare
  • SpeedFactory Spec Outlaw B Series Arias Pistons and BME Aluminum Rods

    $1,485.00

    This is our combination of Arias Pistons and BME Aluminum Rods.  We have worked on our piston with Arias over the past 3 years to come up with the best designed turbo piston possible.  The pistons are available in 84,84.5mm and 85mm and are a flat top design and net roughly 10.8:1 compression.  The rods are from BME out of Nevada – Bill Miller Engineering has been at the forefront of forged aluminum rod technology for decades and his rods are used today in many NHRA Top Fuel and Funny Car engines.

    Select options
    Compare
  • Tial 38mm MV-S Wastegate

    $386.00

    The MV-S 38mm unit is much more compact than its F38 predecessor – standing only  3.7” in height. The V-Band flanges make installation pain free, the three lower & two upper air ports make connecting pressure sources and boost controllers easy!

    Select options
    Compare
  • Tial 44mm MV-R Wastegate

    $386.00

    The MV-R 44mm wastegate is more compact than any current 44 or 46mm wastegate on the market. You get two top air ports and three bottom air ports for easy install. This unit is a direct bolt on for our V44. The MV-R has an optional extreme high temp casting available for Motorsport applications.

    Select options
    Compare
  • Tial Q 50mm

    $259.99

    Q is the first revision of the original TiAL BOV. The Q bolts up to any standard TiAL flange, no re-welding.  This is the highest flowing BOV on the market.  It’s offered with a variety of springs for different vacuum levels and a special spring specifically for supercharged vehicles

    Select options
    Compare
  • Tial V60 Wastegate

    $549.00

    The largest unit in the TiAL lineup. This massive 60mm wastegate will control boost with dead on accuracy in the most demanding situations. The V60 is a favorite in the drag racing and road racing industries, from the burnout box to the finishing line at Circuit de la Sarthe.

    Select options
    Compare

Showing 97–108 of 120 results